PVC韓國LG TL-800(片材專用材料顆粒）
商品屬性參數
品牌寶聚萊
型號型號齊全
產地韓國/臺灣/寧波
可售賣地國內
用途范圍粘合劑、表面涂漆、印刷油墨、地板材料、工業涂料
材質聚氯乙烯均聚物/氯乙烯醋酸乙烯
顏色白色透明
用途級別通用級
特性級別增韌級,增強級
加工級別注塑級
聚氯乙烯（PVC）糊樹脂顧名思義是此種樹脂主要以制成糊狀形式來應用，人們常用此種糊稱作增塑糊，是未加工狀態下的聚氯乙烯塑料的一種獨特液體形式。糊樹脂常由乳液和微懸浮法制得。
聚氯乙烯糊樹脂因粒度微細，其質地像滑石粉，具有不流動性。聚氯乙烯糊樹脂同增塑劑混合后經攪拌形成穩定的懸浮液，即制成PVC糊料，或稱作PVC增塑糊、PVC溶膠，而且人們正是以這種形式用來加工成終制品。在制糊過程中，根據不同的制品需要，添加各種填料、稀釋劑、熱穩定劑、發泡劑及光穩定劑等。
PVC糊樹脂工業的發展，提供了僅經加熱就變?yōu)榫勐纫蚁┲破返囊环N新型的液態材料。該種液態材料配置方便，性能穩定、易控制、使用方便、制品性能優良、化學穩定性好，具有一定的機械強度、易著色等，因此被廣泛應用于人造革、搪膠玩具、軟質商標、墻紙、油漆涂料、發泡塑膠等的生產。
規格用途
| 規格級別 | 其它 其它 其它 | 外觀顏色 | |
| 該料用途 | 透明制品：普通透明片材、食用藥品包裝材料、擠吹透明膜、電子插件、液體容器等。 | ||
| 備注說明 | |||
| 性能項目 | 試驗條件[狀態] | 測試方法 | 測試數據 | 數據單位 | |
| 基本性能 | 表面密度 | ASTM D1895-90 | ≥0.48 | g/cm | |
| 聚合度 | JIS K6721-77 | 770-850 | |||
| 物理性能 | 揮發減量 | 110?CX1hr | ASTM D3030-95 | ≤0.3 | % |
| 粒度 | 45 mesh | ASTM D1705-92 | ≥99.5 | % | |
| 生物化學性能 | 殘留VCM含量 | ≤8.0 | ppm | ||
東莞市華韻塑膠原料有限公司：代理、經銷國內外塑化原料，精細化學品，塑料添加劑。具有美國、日本、德國、韓國等多家化工公司產品，所涉及產品包括塑膠原料，塑料添加劑，顏料、各類塑料助劑、改性劑等。
長期供應如PVC糊，穩定劑，碳黑，消光粉，丙烯酸樹脂等工業原料，公司密切關注各國高新化工技術發展動態步伐，輔以技術咨詢、售后服務、信息反饋等系統經營方式，真情服務于我們的客戶，使華韻塑膠原料成為塑料，油墨、涂料、橡膠、人造革、文教制品、電線電纜等行業的合作伙伴。
歡迎來電來函咨詢相關事宜。
POLYVINYL CHLORIDE Polyvinyl Chloride (PVC) is a polymer bed by the polymerization of vinyl chloride monomer (VCM) in the presence of peroxide, Azo compound and other initiators, or by the mechanism of Radical polymerization under the b of light and heat. Homopolymer of vinyl chloride and Copolymer of vinyl chloride are called vinyl chloride resins. PVC is a white powder with amorphous structure, the degree of branching is relatively small, the relative density is about 1.4, the glass transition temperature is about 77 ~ 90 °C, the decomb temperature is about 170 °c, the stability to light and heat is poor, above 100 °C or after long-time sunlight exposure, it will decompose and produce, and further automatic catalytic decomb, cause discoloration, physical and mechanical properties also rapidly decline, in the practical application must be added to enhance the stability to heat and light. The polyvinyl chloride is an amorphous polymer with a small shrinkage. Powder should be preheated before processing to remove water, enhance plasticizing effect, prevent bubbles. And PVC easy to decompose, especially in high temperature and steel, copper contact easier to decompose (decomb temperature 200 degrees) . Molding temperature range is small, must strictly control the material temperature. Use of screw injection machine and through the nozzle, the aperture should be large, in order to prevent dead-end material. Mold pouring system should be large, gate section should be large, mold should be cooled, mold temperature 30-60 degrees, material temperature 160-190. Under the glass transition temperature (TG, 80 °C) , the polyvinyl chloride is in the glass state; at the TG → viscous flow temperature (TF, about 160 °C) , it is highly elastic and rubbery, and has plasticity; at the TF → thermal decomb temperature (Td) , it is viscous flow state, the higher the temperature, the easier the flow is. When the temperature exceeds TD, a large amount of HCL is decomposed out of PVC, and the material loses its chemical stability and physical properties. Therefore, Td is the upper limit of processing temperature. Due to the large intermolecular force of polyethylene, TF is very high, even close to the decomb temperature, so plasticizers need to be added to reduce TF. On the other hand also need to add stabilizers, so as to improve the TD of PVC, in order to process molding. Vinyl chloride polymer. PVC. The polyvinyl chloride is the second largest variety of plastic, after polyethylene. Glass transition temperature 80 ~ 85 °C, density 1.35 ~ 1.45 G/CM, use temperature-15 ~ 60 °C. PVC has excellent acid and alkali resistance, wear resistance, fire resistance and insulation properties, and most of the plasticizers mixing well, so can significantly change the material's mechanical properties. Good processing perbance, low price, but to light, thermal stability, 100 °C above or under light rapidly decline in perbance. PVC materials are widely used, mainly used in the production of: Pravin PVC card; PVC oem; Pvc Iron Wire; PVC curtain; PVC Coated Welded Mesh; PVC Foam Board, PVC ceiling, PVC water pipe, PVC skirting line and so on as well as threading pipe, cable insulation, plastic doors and bs, plastic bags, etc. . PVC products can be seen everywhere in our daily life. PVC is used to make a variety of imitation leather, used in luggage, sporting goods, such as basketball, football and football. The utility model can also be used for making belts for unibs and special protective equipment. PVC material is widely used, and has good processing perbance, low manufacturing cost, corrosion resistance, insulation and other good characteristics.
