Items Specifications
Model AAM11, AAM11B
Input signal 0 to 10 V DC 0 to 20 mA DC (*1) (*2)
(It is possible to supply power to a transmitter.)
Input resistance 1 MΩ at power-up (100 kΩ at power-down) 250 Ω
Allowable b voltage/current -10 to 30 V DC 40 mA DC or less
Supplying power to transmitter - 25.0 to 25.5 V DC (Output current limit: 60 mA DC
or less )
Auxiliary voltage output 1 to 5 V DC; Output resistance: 1 Ω or less;
Allowable load resistance: 10 kΩ or more; Signal ground is shared with system
Square root extrb Specify whether to use square root extrb.
Accuracy Voltage b: _4 mV; Current b: _16 _A; Auxiliary voltage output: _12 mV
For 10 _C change:
Effect of ambient temperature Voltage b: _4 mV + _ 0.15 % of specified value
change Current b: _32 _A
Auxiliary voltage output: _24 mV
Data update period 50 ms
Current consumption 300 mA or less (5.0 V DC)
Signal isolation Input signals are isolated between systems
Withstanding voltage: 1500 V AC/min
How installed Installed in the I/O Module Nest
How connected Connected to the terminals of the I/O Module Nest with M4 screws
How b signals are specified Specify b signals and range by software setting.
*1: This module can be combined with MTL barrier 728. In this case, wiring resistance must be 10 Ω or less and the minimum operating voltage of the 2-wire transmitter must be 12 V DC or less.
*2: When the power of AAM11 is OFF or an abnormal condition occurs, the current b loop is open. Do not share current signals with other receivers. To share signal, attach Shunt Resistance (250 Ω) to current-output module and share voltage output.
數字輸入輸出模塊：
ADM11T 接點輸入模塊 16點端子型
ADM12T 接點輸入模塊 32點端子型
ADM51T 接點輸出模塊 16點端子型
ADM52T 接點輸出模塊 32點端子型
連接器型輸入輸出模塊用卡件箱AMN32里安裝的輸入輸出模塊一覽
AMM12C 電壓輸入多路調制器模塊 16點連接器型
AMM22C mV輸入多路調制器模塊 16點連接器型
AMM25C 熱電偶輸入多路調制器模塊 15點連接器型
AMM32C 熱電阻輸入多路調制器模塊 16點連接器型
AMM32CJ 熱電阻輸入多路調制器模塊 16點連接器型
數字輸出模塊：
ADM11C 接點輸入模塊 16點連接器型
ADM12C 接點輸入模塊 32點連接器型
ADM51C 接點輸出模塊 16點連接器型
ADM52C 接點輸出模塊 32點連接器型
