臺歷裝訂機 掛歷裝訂機 日歷裝訂機 筆記本裝訂機 校正系統 Adjust system
該系統采用氣缸驅動連桿機構上的校正針來實現（見圖七）。根據產品的不同校正針的位置角度數量可以根據需求自行調整。保證了設備的精度和穩定性。The system is implemented using a adjust pin on the cylinder drive b mechanism (Picture 7). According to the product of the different correction needle b angle number can be adjusted according to demand. To ensure the accuracy and stability of the equipment.
臺歷裝訂機 掛歷裝訂機 日歷裝訂機 筆記本裝訂機 繞線穿線系統 Forming and binding system
該系統由供線系統、繞制成型機構、夾緊機構、裁剪機構、冷卻系統組成。機械手將產品送至該工位后，夾緊機構夾緊，然后繞制成型機構旋轉并將成型的鐵絲穿入待裝訂的產品中，同時在繞線治具處進行風冷，然后通過裁剪機構將線剪斷，夾緊機構松開，機械手4將產品移至下一工位。
根據產品的大小不一所需穿線的長短不一可通過調節裁剪機構中兩剪刀的間距來達到要求，繞線的節距變更可通過更換不同節距的治具來實現，大大提高了設備的使用價值（見圖八）。
The system consists of supply wire system, wire bing structure, clamping structure, cutting structure, cooling system. After the gripper sends the product to the station, the clamping structure clamp and then rotated around the bing structure and the shaped wire is inserted into the product that are waiting for binding, while air-cooled at the wire fixture, The cutting structure will cut the wire and the clamping structure is released, and the gripper 4 moves the product to the next station.
Depending on the size of the product, the length of the bl wire may vary by adjusting the spacing of the two scissors in the cutting structure. The change in the pitch of the winding can be achieved by changing the fixture of different pitch, greatly improving the equipment Use value
河南省
鄭州市 南陽市 新鄉市 安陽市 洛陽市 信陽市 平頂山市 周口市 商丘市 開封市 焦作市 駐馬店市 濮陽市 三門峽市 漯河市 許昌市 鶴壁市 濟源市
臺歷裝訂機 掛歷裝訂機 日歷裝訂機 筆記本裝訂機