河北駿豪機械設備有限責任
聯系人:張經理 13933002678
電子控制技術的快速發展使得電動叉車操作變得越來越舒適,適用范圍越廣,解決物流的方案越來越多。這些方面來看,電動叉車的市場需求肯定會增長速度會越來越快,電動叉車市場份額也會越來越大的。With the rapid development of electronic control technology, the operation of electric forklift becomes more and more comfortable, and the range of application is more and more. In these respects, the market demand of electric forklift will certainly increase, the speed will be faster and faster, and the market share of electric forklift will be more and more big.
別離,伴一陣清風揚袖而去;
奈何,相遇抵不過年輪分化。
只是悲離,
被時間擱淺;被時光的速度拋離。
我聽著光陰帶來的故事,想訴說年輪給予我的故事,
日常維護
1、 電池應該經常補添蒸餾水(純水)。
2、 長期不使用電動叉車應該將蓄電池充滿電擱置。并保持相隔1~2個月左右的頻率進行充電。
3、 在多班作業時,電機驅動的倉儲叉車需要有備用電池(連續工作的情況下,電池電量消耗的快,對電池的損耗也比較大)。
4、 電瓶充電時,必須將充電回路與斬波器完全脫離,因?yàn)槌擞绊懗潆姍C(jī)充電外,充電機產生的過電壓也會損害斬波器。
5、 電池不要橫放。因?yàn)?,電池的?nèi)部一般是22~28%的稀硫酸。電池正放的時候電解液可以淹沒極板并且還剩下一點空間如果把電池橫放的話會有一部分電極板暴露在空氣中,這對電池的極板非常不利,而且一般的電池的觀察孔或者電池的頂部都有排氣口與外界相通,所以電池橫放電解液很容易流出。
6、選擇智能型分階段的充電器,防止過充導致失水。
7、選擇高效率的電動輪轂系統,減少工作電流。
8、勤充電或保持合理的充電頻率,有計劃充電。如一天一充或二天一充。
9、防止虧電存放,虧電存放對電池最有害。
Routine maintenance
1, the battery should often add distilled water (pure water).
2, long-term use of electric forklift, battery should be full of electricity on standby. And keep the charge about 1~2 months apart.
In
3, a number of operations, motor driven warehouse trucks need to have spare battery (continuous work, battery power consumption fast, loss of battery is relatively large).
4, when charging the battery, the charging circuit must be compleby separated from the chopper, because in addition to affecting the charger charging, the over-voltage generated by the charger will damage chopper.
5, do not put the battery. Because the inside of the battery is generally 22 ~ 28% dilute sulfuric acid. The battery is placed when the electrolyte can be submerged and plate left a little space if the battery horizontally if there will be a part of the electrode plate is exposed in the air, the battery plate is very negative, and the top of the general battery or battery has the observation hole outlet is communicated with the outside, so the battery electrolyte is placed horizontally easy outflow.
6 、 choose the inbligent phase charger to prevent overcharge and lead to dehydration.
7, select efficient electric wheel hub system to reduce operating current.
8, frequently charge or maintain reasonable charging frequency, it is best to have planned charging. Such as one day a charge or two days a charge.
9, to prevent loss of electricity storage, loss of electricity storage, the most harmful to the battery.
注意事項
蓄電池在充放電過程中,電解液中的水會因?yàn)殡娊夂驼舭l(fā)而逐漸減少,導致電解液面下降。如果不及時補充的話,有可能縮短蓄電池的使用壽命,應及時補充蒸餾水。切忌用飲用純凈水代替,因?yàn)榧儍羲泻卸喾N微量元素,對蓄電池會造成不良影響。
給蓄電池添加電解液或水時要注意,電解液高過極板10至15毫米即可;有兩條紅線的蓄電池,電解液不得超過上紅線。電解液太滿會從蓄電池蓋小孔中溢出。一旦流到蓄電池正、負兩極之間,就會形成回路自放電。遇此情況就應將電解液擦掉,或用開水沖洗擦凈。
加電解液時若有東西不慎掉入,千萬不能用金屬物去[2] 撈,應用木棒夾出雜質;如用鐵絲或銅絲去撈,金屬分子會在硫酸的腐蝕下進入蓄電池形成自放電而損壞蓄電池。
車輛停止運行若超過20天,應當拆卸電池的負極電線,以免發生漏電事故。
Matters needing attention
In the process of charging and discharging, the water in the electrolyte will gradually decrease because of electrolysis and evaporation, leading to the decrease of the electrolyte level. If not bly added, it is possible to shorten the service life of the battery, should be added to the distilled water. Avoid using purified water instead of water, because pure water contains a variety of trace elements, the battery will cause adverse effects.
When adding electrolyte or water to the battery, be careful that the electrolyte is 10 to 15 millimeters higher than the plate, and that the battery with two red lines shall not exceed the upper red line. The electrolyte is too full and will overflow from the small hole in the battery cover. Once flowing between the positive and negative poles of the battery, the circuit will b a self discharge. In this case, the electrolyte should be rubbed off or rinsed with boiling water.
And if something inadvertently fall into the electrolyte, do not use bl to make [2] application, stick out impurities; such as wire or copper wire Qulao, bl elements in sulfuric acid corrosion into the battery self discharge and damage to the battery.
If the vehicle is stopped running for more than 20 days, the negative wire of the battery shall be removed so as to avoid leakage accident.