直流電壓表、電流計指示器/控制器
1/8 DIN
DP2000-AB Series
5年保修 CE
直流電壓表、電流計指示器/控制器
1/8 DIN
DP2000-AB
Series:直流電壓表、電流計指示器/控制器<br>1/8 DIN
DP2000-A4
±1999 or ±9999 Count
Display Span
±200 mV to ±200V or ±100 mV to ±100V Ranges
±20 μA to ±2 A
or ±10 μA to ±1 A Ranges
1 or 0.1 mV/Count Analog Output
Front-Panel
Accessible Adjustments
LED or LCD Display
Automatic Polarity
Display
Hold and Test
Screw-Terminal Barrier Strip
The DP2000/9000A and
DP2000/9000B are a high-quality ±1999 or ±9999 count DC voltmeter and ammeter,
respectively. The base meters are digital indicators for use in
electrically-noisy industrial environments. With the addition of analog and
control outputs, these meters can provide two-wire currentloop signals to a
central control room and provide local alarm or control. A 1/8 DIN case with
screw terminals for signal and power is standard. A wide range of options are
available.
Power and Display Options
Six types of power supplies are
available: 120 Vac, 240 Vac, 24 Vac, 5 Vdc, isolated 9 to 32 Vdc and isolated 26
to 56 Vdc. An LED display is standard, an LCD display is optional and is
recommended for viewing in bright ambient light. A NEMA 4 (IP65) splash-proof
lens cover is available.
Signal b and power connections are made via
a rear barrier terminal strip. The motherboard rear edge connector provides
access to hold and test, polarity, clock, and the standard analog output and
optional analog outputs. Decimal point bs can be selected by jumpers.
Analog Output Options
A 1 mV/count (±2V full-scale) or 0.1 mV/count
(±1V fullscale) analog output is standard and is ideal for driving a strip-chart
recorder. An additional analog output can be provided by an optional vertical
plug-in board. Available output signals are 0 to 5 Vdc, 0 to 10 Vdc, 0 to 1 mA
(source or sink) and 4 to 20 mA (source or sink). The top and bottom of each
output range can be scaled to fit a user-selected display span.
Control
Output Options
Additional outputs can be provided by a horizontal upper
board. Available options include single-setpoint control with one 10 A relay,
dual-setpoint control with two 10 A relays, 4 to 20 mA proportional control
(source or sink), time-proportional 2 A solid-state relay control, and isolated,
parallel BCD output.
規(guī)格：
Input Configuration
Configuration:
Bipolar, single-ended
Polarity: Automatic
Span Adjustment: ±4%
Conversion
Technique: Auto-zero, dual slope, average value
Signal
Integration Period: 100 ms, nominal
Reading Rate: 2.5/s, nominal
Display
LED: Red, 14.2 mm (0.56"), 7-segment
LCD: 12.7 mm (0.50"),
7-segment
Power
AC Voltages: 120, 240 or 24 Vac 10%/-15%
AC Frequency:
49 to 440 Hz
DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc,
isolated to 300 Vp; 5 Vdc ±5%, non-isolated
Power Consumption: 8 W
maximum
Common Mode
Voltage: 1500 Vp test (354 Vp per IEC
spacing)
Rejection (DC to 60 Hz): 120 dB
NMR 50/60 Hz: 75 dB (DP2), 130 dB
(DP9)
Environmental
Operating Temperature: 0 to 60°C (32 to
140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Relative Humidity:
95% at 40°C (non-condensing)
Mechanical
Bezel: 96 W x 48 H x 8 mm D (3.78
x 1.89 x 0.31")
Depth Behind Bezel: 139.8 mm (5.50")
Panel Cutout: 92 W x
45 mm H (3.62 x 1.77")
Weight: 17 oz (480 g)
Case Material: 94V-0 UL-rated
polycarbonate
產(chǎn)品型號說明
(1) (2) (3) (4) (5) (6)
DP
(1) Display Resolution and Case
Style
選擇
2 代表 ±1999 counts (3 1/2 digits)
9 代表 ±9999 counts (4
digits)
(2) Display & Power Options
選擇
0 代表 LED 120 Vac (49/440 Hz)
(BQ20 or BQ90)
1 代表 LCD 120 Vac (49/440 Hz) (BQ21)
2 代表 LED 240 Vac
(49/440 Hz) (BQ22 or BQ92)
3 代表 LCD 240 Vac (49/440 Hz) (BQ23)
4 代表 LED
9-32 Vdc (isolated) (BQ24 or BQ94)
5 代表 LCD 9-32 Vdc (isolated) (BQ25)
6
代表 LED 5 Vdc** (BQ26 or BQ96)
7 代表 LCD 5 Vdc** (BQ27)
8 代表 LED 24 Vac
(BQ28 or BQ98)
9 代表 LCD 24 Vac (BQ29)
A 代表 LED 26-56 Vdc (isolated) (BQ2A
or BQ9A)
B 代表 LCD 26-56 Vdc (isolated) (BQ2B)
(3) Analog
Outputs
選擇
0 代表 1 mV/count (supplied on all units)
1 代表 0-5 Vdc
non-isolated (BA01)
2 代表 0-10 Vdc non-isolated (BA01)
3 代表 0-1 mA source
or sink non-isolated (BA01)
4 代表 4-20 mA source or sink non-isolated
(BA01)
5 代表 4-20 mA sink (high-compliance) non-isolated. (BA02)
6 代表 4-20
mA ISOLATED (BA03)
(4) Control Outputs
選擇
0 代表 None
1 代表
Dual-setpoint 10 A relay. (BDT1)
2 代表 Proportional 4-20 mA control source or
sink (BDP1)
3 代表 Time-proportional solid-state 2 A relay plus proportional
4-20 mA control source or sink. (BDP2)
4 代表 BCD (isolated latched buffered
byte addressable). Includes 50-pin mass-termination connector. (BDD2)
5 代表
Single-setpoint 10 A relay (BDS1)
(5) Input Type and Range
選擇
A1 代表 DC
Voltage ± 199.9 mV (DP2000) or ± 99.99 mV (DP9000)
A2 代表 DC Voltage ± 1.999 V
(DP2000) or ± 999.9 mV (DP9000)
A3 代表 DC Voltage ± 19.99 V (DP2000) or ±
9.999 V (DP9000)
A4 代表 DC Voltage ± 199.9 V (DP2000) or ± 99.99 V
(DP9000)
B1 代表 DC Current ± 19.99 μA (DP2000) or ± 9.999μA (DP9000)
B2 代表
DC Current ± 199.9 μA (DP2000) or ± 99.99μA (DP9000)
B3 代表 DC Current ± 1.999
mA (DP2000) or ± 999.9μA (DP9000)
B4 代表 DC Current ± 19.99 mA (DP2000) or ±
9.999 mA (DP9000)
B5 代表 DC Current ± 199.9 mA (DP2000) or ± 99.99 mA
(DP9000)
B6 代表 DC Current ± 1.999 A (DP2000) or ± 999.9 mA (DP9000)
(6)
Display Color
選擇
Nothing(leave field blank) 代表 for Red Display
(standard)
-G 代表 Green Display
