瑞典伊薩OK TIGROD 55、ER100S-G低合金鋼焊條
分類
| SFA/AWS A5.28 |
| ER100S-G |
| EN 16834-A |
| Mn3NiCrMo |
| 測試溫度(焊態) | 0 °C |
| 結果(焊態) | 150 J |
| 測試溫度(焊態) | -20 °C |
| 結果(焊態) | 85 J |
| 伸長率(焊態) | 27 % |
| 屈服強度(焊態) | 585 MPa |
| 抗拉強度(焊態) | 750 MPa |
| 電流類型 CA/CD/CC (+)(-) | DC(-) |
| 元素 | C |
| 額定百分比 | 0.085 % |
| 元素 | Si |
| 額定百分比 | 0.7 % |
A copper coated, low alloyed, chromium-nickel-molybdenum (0,5% Cr, 0,5% Ni, 0,2% Mo) rod for GTAW of high strength steels with a minimum tensile strength of 690 MPa. The rod is also suitable for welding of steels where a good impact strength at low temperatures is required.
