STANDARD RANGE LIST
Standard Ranges (for Thermocouple Input)
Select CT5 range from the table below. It is not allowed to specify a range not included in the table.
With CT5*B; however, it is possible to change a type of sensor and a range after shipment if BRAIN Terminal is connected. If a range not included in the Standard range below is set, combined accuracy with linearizer error is _0.5 %.
Sensor Standard range (_C)
Type R 0 - 1000 0 - 1600 600 - 1600
Type S 0 - 1200 400 - 1400 800 - 1600
0 - 1400 500 - 1500
Type B 600 - 1500 600 - 1700
0 - 300 ** 200 - 500 500 - 1000
0 - 400 200 - 700 500 - 1200
0 - 500 200 - 1000 600 - 1000
Type K 0 - 600 300 - 600 600 - 1200
0 - 800 ** 300 - 800 700 - 1000 *
0 - 1000 400 - 800 700 - 1200 *
0 - 1200 400 - 1000
100 - 500 500 - 800
0 - 200 0 - 500 200 - 500
0 - 250 0 - 600 ** 300 - 500
Type J 0 - 300 100 - 300 300 - 600
0 - 350 100 - 500
0 - 400 200 - 400
0 - 200 0 - 600 200 - 500
0 - 250 0 - 700 300 - 500
Type E 0 - 300 0 - 800 300 - 600
0 - 350 100 - 300 300 - 700
0 - 400 100 - 500
0 - 500 200 - 400
Type T –100 - 200 0 - 250 100 - 300
–150 - 150 0 - 300
Note: Bold letters show Japan Electric Measuring Instruments Manufacturer’s Association Standard.
Note: For ranges marked by “*” symbol, zero elevation exceeds specifications.
Note: For ranges marked by “**” symbol, linearizer error is _0.3 % of span.
Note: Measuring range of Type B is 600 to 1700 _C.
Standard Ranges (for RTD Input)
Select CR5 range from the table below. It is not allowed to specify a range not included in the table.
Sensor Standard range (_C)
-20 - 50 0 - 70 20 - 50
-40 - 60 0 - 100 50 - 100
JIS:1989JPt100 -50 - 50 0 - 120 50 - 150
or -50 - 100 0 - 150 50 - 200
JIS:1989, DIN -50 - 150 0 - 200 100 - 200
(IPTS-68) Pt100 -100 - 50 0 - 250 100 - 250
-200 - 50 ** 0 - 300 100 - 300
0 - 20 0 - 400 200 - 400
0 - 50 0 - 500 300 - 500
Note: Bold letters show Japan Electric Measuring Instruments Manufacturer’s Association Standard.
Note: For ranges marked by “**” symbol, linearizer error is _0.4 % of span.
