詳情歡迎來電咨詢
beter
Overall dimension: 2600*1800*2100mm
Fan motor: 1.5 kw
Air compressor: 7.5kw
Electric heating: 0.5 kw
Total power: 23kw
Snow nozzles: 106
Nucleon: 20
Nozzle turns: 3 rows
Rotation Angle: 360 degrees
Angle of elevation: 50 degrees
Snow making temperature: -35℃ ~ 0℃
Snow output: 50 ~ 80m cubed /h
Head: 40 ~ 120m
Supply voltage: 380 volts
Quick power connection: 63A
Structure: 3 tires and rotatable bracket
Use and maintenance
Check whether the power connection is illusory before starting. Whether the voltage is stable. If the generator is powered, the continuous power supply shall not be less than 380 volts. Whether the valve is frozen and blocked. If blocked, electric heating can be turned on for preheating. Whether the connection between nozzle, nucleon and nozzle is sealed. If sealing ring aging or leakage timely replacement. Make sure the fan and air compressor are running straight. The oil level of the air compressor is maintained at the red line. If there is ice when making snow, remove it in time to avoid spatter and injury. Check the pressure gauge and pressure relief valve perbance before making snow every time. Belt tightening; Drain the remaining water in the pipeline after use. Clean nozzles and filters properly according to local water quality. Bearings, bolts, bescopic rods and turntables are oiled regularly to maintain the lubrication of each part. Change the oil and air filter element every snow season.
